ULTIMATE Surgical Kit

Contact

Manufacturer: Global D

Origin: France

Package: Kit


ULTIMATE PROTOCOL: The ULTIMATE protocol is common to In-Kone® PRIMO, In-Kone® UNIVERSAL, Implant 3.0 and twinKon® implants

The progressive drilling sequence and homothetic to the silhouette of the implants has been developed in order to obtain an intimate primary stability uniformly distributed over the bone.

The drills have been designed according to the latest technological advances in rotary instruments in order to combine high cutting precision and efficient bone chip removal.

Latest generation drills

The protocol can be adapted very precisely to different bone densities. The cylindrical-conical profile allows the drills to be centered on the first third of the previous wellbore, thus conferring perfect stability.

The ULTIMATE protocol is specially designed for the placement of In-Kone® UNIVERSAL, In-Kone® PRIMO, Implant 3.0 and twinKon® implants.

Clinically validated by a multicentric team of dental surgeons, ULTIMATE is a protocol that can be adapted to any type of bone density.

PRESENTATION

DOUBLE COLOR CODE

ULTIMATE Surgical KitThe drills are dual color coded, building on the color coded indications on the ULTIMATE Surgery Kit and allowing the terminal drilling to be precisely defined based on site bone density and bone diameter. implant. The primary stability of implants is therefore reproducible.

 

 

 

 

 HOMOTHETY

ULTIMATE Surgical KitThe homothety of the drills to the silhouette of the implants allows a uniform distribution of the primary stability over the entire active surface of the implant from the initial phase of healing.

 

 

 

 

 

STABILIZATION OF THE DRILL

ULTIMATE Surgical KitThe cylindrical-conical drills are equipped with a double edge allowing an effective cut on two planes. This design not only favors the centering of the drilling axis in the well, but above all it gives the practitioner constant control of the progress of the drill in the bone, without suction and without excessive pressure on the head of the contra-angle. The drill works with little resistance and less heating.

 

 

 

CHIP EVACUATION

The 4 helical grooves of the drills generate a significant and efficient evacuation of the bone chips without any “stuffing” effect. The preparation is precise and the initial intimacy between the recipient site and the implant is favored.

 

 

 

 

CONTROLLED INSERTION

ULTIMATE Surgical KitThe open tip angle (120 °) of the final drills reduces apical overdrilling of the drill. This characteristic will be appreciated when placing implants near anatomical obstacles. The feeling of control over the drilling depth when reaming is more intuitive.

 

 

 

 

ANTI-REFLECTIVE TREATMENT

ULTIMATE Surgical KitThe drills are treated with an anti-reflective marking.

In-Kone® Implant Keys, Implant 3.0 Implant Keys, twinKon® Implant Keys & Surgical Torque Wrench

IN-KONE® IMPLANT HOLDER KEYS

IN-KONE® IMPLANT HOLDER KEYSImplant chucks are available in long and short, manual and contra-angle versions. They have a black ring of 1.5 mm height which allows to validate the “full” insertion of the instrument into the implant connection then to visualize the Infra-Crestal burial of the implant shoulder duMPLANT

 

 

 

 

 

KEYS IMPLANT 3.0

IN-KONE IMPLANT HOLDER KEYSImplant screwdrivers are available in contra-angle and manual versions. They have a black ring which makes it possible to validate the “full” insertion of the instrument into the implant connection and then to visualize the Infra-Crestal burial of the implant shoulder during screwing into the bone.ring screwing in. the bone.

 

 

 

 

TWINKON® IMPLANT HOLDER KEYS

IN-KONE IMPLANT HOLDER KEYSImplant chucks are available in long and short, manual and contra-angle versions. The red O-ring ensures a good grip between the key and the implant holder.

 

 

 

 

 

 

SURGICAL TORQUE WRENCH

IN-KONE IMPLANT HOLDER KEYSA 20-80 N.cm disengageable surgical torque ratchet * allows the insertion torque of implants to be controlled without damaging the quality of the recipient site and without damaging the integrity of the implant connection or the instrumentation. (*) key made by Josef Ganter GmbH

 

 

 

 

 

Cortical burs are used to release excess cortical bone supra-implant if necessary and ensure passive placement of healing screws.

Cortical burs are equipped with a centering tip placed in the implant to stabilize the instrument during its rotation. The PEEK head preserves the integrity of the connection during operation.

USE OF CORTICAL BURS

IN-KONE IMPLANT HOLDER KEYSThey can be used both in one surgical step and also in two surgical steps. The Ø3.4 cortical bur must be passed before inserting the prosthesis on the Implant 3.0.

A removable stop system, optional, with direct drive to the contra-angle, allows to secure the drilling depth near anatomical obstacles

They are recommended when the bone crest is sufficiently flat.

KIT AND MICRO KIT OF STOPS

COMPLETE ULTIMATE STOPPER KIT

KIT AND MICRO KIT OF STOPS This kit is compatible with the ULTIMATE drilling protocol and therefore, with the In-Kone® UNIVERSAL SA², In-Kone® PRIMO, Implant 3.0 and twinKon® implants of diameter Ø3.5 / Ø4 / Ø4.5 / Ø5. Two sets of Ø3 mm stops are also available in this complete kit. The stops can only be used on ULTIMATE short drills.

 

 

 

 

 

ULTIMATE MICRO STOPPER KIT

KIT AND MICRO KIT OF STOPSRemovable support, comprising two sets of Ø3 mm stops that can be used with the drills. This micro kit can be integrated into the ULTIMATE kit. The stops are adaptable to short ULTIMATE drills.

 

 

 

There are no reviews yet.

Related products
In Kone15 glabal D

Implant In-Kone®

Manufacturer: Global D

Origin: France

Package: Box


In Kone16 glabal D

Prosthesis In-Kone®

Manufacturer: Global D

Origin: France

Package: Box


EZ Cure™ Membrane1 biomatlante 1

EZ Cure™ Membrane

Manufacturer: Biomatlante

Origin: France

Package: Option


MBCP™1 Biomatlante 1

MBCP+™

Manufacturer: Biomatlante

Origin: France

Package: Option


twinKon 4.7 global D removebg preview

Twinkon® 4

Manufacturer: Global D

Origin: France

Package: Implant/Abutment